| Shure: | Solder SD mic cable to Mini XLR (3 pin or 4 pin) of transmitter (as indicated below) |
| BACKVIEW |
| SD Systems UHF | ________________ |
| backvieuws UHF plug SD Systems: | |
|
|
|
| SD Systems VHF .. (Hirose "HR"connector 4 pin) | ...... Follow point A to F ....... |
| Sennheiser: | Solder SD mic cable to Stereo Mini Jack of transmitter (as indicated below) |
| Wire of SD mic: | MiniJack of beltpack: | ||
| Solder | RED wire | to | TIP |
| (RING not in use) | |||
| Solder | BLUE (or WHITE) wire | to | the Ground |
| Solder | the SHIELD | to | also the Ground |
| adjust | SEnsSitivity | on | -30dB (should be 60 !) |
