Combination SD-mics with Shure wireless systems
|
|
|
|
ULX1 bodypack transmitter http://www.shure.com/wireless/ulx/ulx1.asp $300.- |
U1 bodypack transmitter http://www.shure.com/wireless/uhf/u1.asp $700 |
|
Automatic frequency selection light weight durable plastc design 9V battery |
For entire system Metal construction AA batteries |
LCM 85 MkII - LCM 70 - LCM
77 - LCM 77 F
these microphones can be used with
Shure bodypacks if the user removes the 1/4 " connector
and solders on a
4-pin mini connector
(TA4F) as described below.
Pin 1: shield
Pin 2: red
Pin 3: white w/jumper to Pin 4
The -20dB pad on the bodypack does
NOT need to be switched in for use
with this microphone
Since this is a dynamic cartridge, the user can simply use a
Shure WA310 cable (TA4F to XLR) to connect it to the Shure bodypack. This
accessory cable is also available from the Shure Service Department
for US
$20.80 each.
Details about contacting Service Department
can be
found at www.shure.com/service
Double mike systems LCM80(EW) / LCM82(B) / LCM83
See above, for pin-connection.
Solder the 2 wires parallel to the pins.
 |
STM 99 - Shure manufacturers an accessory cable that will allow the
user to connect the STM 99 directly to a Shure bodypack.
The part
number for this cable is 90A4039 and can be requested from the Shure Service
Department for
US $21.61 each.
Users of this microphone will need
to make certain that the -20dB pad
on the ULX1 or U1 bodypack is switched in.
