mic100


The LCM 100HL offers the ultimate solution for the double bass: it guarantees a pure natural sound reproduction of digital studio quality, from the most subtle bow to heavy jazz solo’s. The standard mic HL includes a bridge clamp and a High-Level pre-amp to connect with the line input of your bass amplifier.	The LCM100 can be combined with our PU-4 pickup: this will permit you to play with a very loud volume! Four separate piezo’s are fixed on the bridge near each string for vital contact sound.

Both signals of a piezo element (PU-4 or the one you're using already) can be mixed with the BS-2 type pre-amp: it has a piezo input and a mic input with adjustable volume for both piezo and mic, a balance control between the piezo and mic, tone controls (anti-feedback), stand by switch, battery check, and a line-level output.

LCM102:
Together with the authentic acoustic sound of the LCM100 the combination with PU-4 and BS-2 will give you the most perfect bass sound you ever can get!

LCM100XLR same as LCM100 but with XLR output (and phantom power)

	`SPECIFICATIONS LCM100 microphone``Type:back electret condenser microphone. Polar pattern: cardiod-unidirectional. Frequency response: 20-20.000 Hz. Sensitivity at 1 kHz,: -66 dB, Output impedance: 200 ohm. Max.sound pressure level: 139 dB at 1% THD. Powering: 9 V battery. HL and BS-2 type preamps have line level output (for guitar amp).`

LCM100 for Double Bass